PicoBNC+ COP and signal probe

$229.00

The TA398 COP and signal probe from Pico Technology is the easiest and fastest non-intrusive way to check coil-on-plug ignition coils and spark plugs.

  • Find misfires fast

  • Displays scope patterns of the secondary, faster than scoping the primary

  • Can also be used to investigate injectors and other inductive actuators

  • Flexible design allows for easier access to hard-to-reach components

  • No batteries required

Like distributors, spark plug wires are starting to disappear from cars. With the new COP ignition systems the ignition coils are connected directly to the spark plugs — eliminating the need for the spark plug wires. With no high-voltage spark wires, a COP probe is required to be able to pick up the secondary ignition waveform.

Unlike the BNC TA204 COP Probe, the connecting lead is integral to the TA398 BNC+ COP Probe, therefore no TA033 (BNC to BNC lead) is required.

This lead is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration. The lead requires a PicoScope featuring the PicoBNC+ such as the 4225A or 4425A.

Quantity:
Add To Cart

The TA398 COP and signal probe from Pico Technology is the easiest and fastest non-intrusive way to check coil-on-plug ignition coils and spark plugs.

  • Find misfires fast

  • Displays scope patterns of the secondary, faster than scoping the primary

  • Can also be used to investigate injectors and other inductive actuators

  • Flexible design allows for easier access to hard-to-reach components

  • No batteries required

Like distributors, spark plug wires are starting to disappear from cars. With the new COP ignition systems the ignition coils are connected directly to the spark plugs — eliminating the need for the spark plug wires. With no high-voltage spark wires, a COP probe is required to be able to pick up the secondary ignition waveform.

Unlike the BNC TA204 COP Probe, the connecting lead is integral to the TA398 BNC+ COP Probe, therefore no TA033 (BNC to BNC lead) is required.

This lead is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration. The lead requires a PicoScope featuring the PicoBNC+ such as the 4225A or 4425A.

The TA398 COP and signal probe from Pico Technology is the easiest and fastest non-intrusive way to check coil-on-plug ignition coils and spark plugs.

  • Find misfires fast

  • Displays scope patterns of the secondary, faster than scoping the primary

  • Can also be used to investigate injectors and other inductive actuators

  • Flexible design allows for easier access to hard-to-reach components

  • No batteries required

Like distributors, spark plug wires are starting to disappear from cars. With the new COP ignition systems the ignition coils are connected directly to the spark plugs — eliminating the need for the spark plug wires. With no high-voltage spark wires, a COP probe is required to be able to pick up the secondary ignition waveform.

Unlike the BNC TA204 COP Probe, the connecting lead is integral to the TA398 BNC+ COP Probe, therefore no TA033 (BNC to BNC lead) is required.

This lead is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration. The lead requires a PicoScope featuring the PicoBNC+ such as the 4225A or 4425A.

HT Extension Lead
$49.00
HT Extension Lead (set of 4 leads)
$202.00
PicoBNC+ secondary ignition pickup
$71.00
Coil On Plug (COP) and Signal Probe
$212.00
Secondary ignition pickup (capacitive with BNC)
$65.00